Se rendre au contenu

Slitting Saw DIN 1837 A

For slotting hard and delicate materials, circular saw blades for metal DIN 1837 A with fine teeth and a tooth shape are advised. Particularly for thin saw blades with a tooth pitch between 0.8 and 3.0 mm, a tooth shape is appropriate. The cutting edge is quite sharp. Longer chips cannot be effectively removed from the cutting area due to the decreased chip clearance. The slitting saw blades are typically modified to have a flange and hollow ground surfaces. They can be provided with a keyway and AW tooth form (the tooth form A with alternate chamfering

Materials: steel, cast, non-ferrous metals, plastic

Application:  recommended for slotting fragile and hard materials which make short chips, suitable for cutting thin-walled profiles

Machine: metal processing machines




 

Characteristic:

  • Circular saw blades for metal with fine teeth
  • Hollow ground with a flange, standardly produced without driving pin holes and without a keyway
  •  Tooth form A (by request AW)

  • Chip clearance is reduced and it can´t remove longer chips away from cutting area efficiently
  • Tolerances and hollow ground according DIN 1840
  • Slitting saw blades for metal DIN 1837 A with fine teeth and A tooth form are recommended for slotting fragile and hard materials. 
  •  A tooth form is suitable especially for thin saw blades with tooth pitch from 0,8 mm to 3,0 mm.
  •  Cutting edge is very sharp.
  •  In standard modification the slitting saw blades are made with hollow ground and with a flange.
  •   Slitting saw blades can be ordered with driving pin holes or with a keyway .
  •   High quality slitting saw 1837 A, designed especially for high performance. Slitting saws produced in India.

slitting saw table

Manufacturing Range: 

  • Diameter RANGE: 50mm to 300mm, 2inches to 12inches.
  • Thickness RANGE:  .40 mm to 20 mm, 12 thousand onwards.
  • Material: M-2, M35, M42.

Coating  Available

slitting saw din 1837 a coating