Se rendre au contenu

Slitting Saw DIN 1838 B

Particularly for cutting off steels, circular saw blades for metal DIN 1838 B with rough teeth and teeth form B are advised. They allow for a larger cut and have a far greater chip clearance than a tooth shape. The saw blades in the standard modification have a flange and are hollow ground. BW tooth form (B tooth form with alternate chamfering) is an option for ordering them.

  • Materials to cut : steel, cast, non-ferrous metals
  • Application: recommended for slotting and cutting materials which make longer chips, suitable for cutting thick-walled profiles (wall over 2 mm)
  • Machine: metal processing machines

Characteristic:

  • HSS circular slitting saw blades with rough teeth
  • Hollow ground with a flange, standardly produced without driving pin holes and without a keyway
  • Tooth form B (by request BW)
  • Compared to type A chip clearance is reduced, which allows to remove chips away from cutting area efficiently
  • Tolerances and hollow ground according DIN 1840
  • High quality slitting saw DIN 1838 B, designed especially for high performance.
  • Circular saw blades for metal DIN 1838 B with rough teeth and teeth form B are recommended especially for cutting-off steels.
  • In comparison with A tooth form they have much bigger chip clearance and they enable bigger cut. In standard modification the saw blades are made with hollow ground and with a flange.
  • They can be ordered with BW tooth form (B tooth form with alternate chamfering).

slitting saw din 1838 b table

Manufacturing Range:-

Diameter RANGE: 50mm to 300mm, 2inches to 12inches.

Thickness RANGE:  .40 mm to 20 mm, 12 thousand onwards.

Material: M-2, M35, M42.

Coating available:

slitting saw din 1838 b coating